NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch

GS700TS Smart Switch Software Administration Manual
Managing System Settings 3-24
v1.0, June 2009
The SNMPv3 View Name screen contains the following field:
• View Name – Enter the user-defined view name. The view name can contain a maximum
of 30 alphanumeric characters.
2. Select the entry.
3. Enter the View Name field in the first row.
4. Click APPLY to update the device.
To add a new SNMP View Name:
1. Click System > SNMP > SNMPv3 > View Name. The SNMPv3 View Name screen displays.
2. Enter the View Name field in the first row.
3. Click ADD to update the device.
To remove an SNMP View Name:
1. Click System > SNMP > SNMPv3 > View Name. The SNMPv3 View Name screen displays.
2. Select the entry to be removed.
3. Click DELETE to remove the entry.
Figure 3-12