NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch

GS700TS Smart Switch Software Administration Manual
Managing System Settings 3-32
v1.0, June 2009
To remove an SNMPv3 user:
1. Click System > SNMP > SNMPv3 > Users Configuration. The SNMPv3 User
Configuration screen displays.
2. Select the user entry.
3. Click DELETE to remove the entry.
Global Trap Configuration
The SNMPv3 Global Trap Settings screen contains parameters for defining SNMP notification
parameters.
To configure SNMP notification global parameters:
1. Click System > SNMP > SNMPv3 > Global Trap Configuration. The SNMPv3 Global
Trap Settings screen displays:
The SNMPv3 Global Trap Settings screen contains the following fields:
• SNMP Notifications – Select whether or not the device can send SNMP notifications.
The possible field values are:
– Disable – Disables SNMP notifications.
– Enable – Enables SNMP notifications. The is the default value.
Figure 3-17