NETGEAR GS728TS Hardware Installation Guide

Chapter 2. Physical Description | 12
2
2. Physical Description
This chapter describes the GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch
hardware features. Topics include:
• GS728TS Front-Panel and Back-Panel Configuration
• GS728TPS Front-Panel and Back-Panel Configuration
• GS752TS Front-Panel and Back-Panel Configuration
• GS752TPS Front-Panel and Back-Panel Configuration
• LED Designations
• Device Hardware Interfaces
GS728TS Front-Panel and Back-Panel Configuration
The GS728TS Smart Switch has 24 10/100/1000 Mbps copper ports and 6 SFP fiber ports, 2
of which are combo ports. Up to two SFP ports (port 27 and 28) at a time can be used as
stacking ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 2 illustrates the front panel of the NETGEAR GS728TS Smart Switch.
Power, Fan, and
Link/Speed/ACT LEDs
10/100/1000M Ethernet Ports
SFP Ports
Reset Button
Stack Master LEDs
Factory
Defaults Button
Stack ID LED
Combo and Dedicated
Figure 2. GS728TS Front Panel

NETGEAR GS728TS Specifications

General

Brand	NETGEAR
Model	GS728TS
Category	Switch
Language	English