34 | Appendix : Technical Specifications
GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Hardware Installation Guide
SNTP (Simple Network Time Protocol) 3 servers. Disabled by default.
Jumbo Frame Support (9K)
IPv6 Management, Multicast, and QoS
Static Routing
MLD Snooping
DHCP Snooping
Protocol and MAC based VLAN
DoS and Auto DoS prevention
ACLs (MAC, IPv4, IPv6 and TCP/UDP based)
Interface
GS728TS/GS752TS:
• 24/48 x 10/100/1000 Mbps copper ports.
• 2 x Combo ports to support 10/100/1000 Mbps copper ports or 1G/100M optical module.
• 2 x SFP (slot) to support 1G optical module.
• 2 x SFP (slot) to support 1G optical module (uplink) and 2.5G stacking (via stacking
cable).
GS728TPS/GS752TPS:
• 24/48 PoE-capable 10/100/1000 Mbps copper ports (8 PoE+ capable).
• 2 x Combo ports to support 10/100/1000 Mbps copper ports or 1G/100M optical module
• 2 x SFP (slot) to support 1G optical module.
• 2 x SFP (slot) to support 1G optical module (uplink) and 2.5G stacking (via stacking
cable).
Stacking Ports:
• GS728TS/GS728TPS: Port 27 and port 28 can be used as the stacking ports or as uplink
ports.
• GS752TS/GS752TPS: Port 51 and port 52 can be used as the stacking ports or as uplink
ports.
LEDs
Per RJ-45 port: Speed/Link/Activity
Per SFP port: Speed/Link/Activity
Per device: Power, Fan, Stack Master, Stack ID
Per device (for GS7xxTPS): LED mode and PoE Max
To Next Page
Loading...
Need help?
General