NETGEAR LB2120 Series User Manual

7. To add a custom APN profile, click the Add button.
8. Enter the settings for the new APN profile as described in the following table.
DescriptionField
Enter the name or acronym of the mobile broadband service provider or any other information
that might help you to identify the APN profile.
Name
Enter the APN that provides access to the mobile broadband network. Use the information that
your mobile broadband service provider gave you.
APN
From the menu, select the authentication mode to access the mobile broadband network:
• None.The service provider does not require authentication.This setting is the default setting.
• PAP. The service provider uses Password Authentication Protocol (PAP).
• CHAP.The service provider uses Challenge Handshake Authentication Protocol (CHAP).
• PAP or CHAP. The service provider uses either PAP or CHAP.
Authentication
If you select an authentication mode, enter the user name to access the mobile broadband network.Username
If you select an authentication mode, enter the password to access the mobile broadband network.Password
Manage the Mobile Broadband Connection
36
LTE Modem Model LB2120

NETGEAR LB2120 Series Specifications

General

Device Type	LTE Modem
LTE Category	Category 4
Download Speed	Up to 150 Mbps
Upload Speed	Up to 50 Mbps
Ethernet Ports	1 x Gigabit Ethernet
Network Technology	LTE, 3G
Antenna Ports	2 x TS-9
Operating Temperature	0° to 40°C
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	90% maximum relative humidity, non-condensing
SIM Card Slot	Yes (Mini-SIM/2FF)
Power Supply	12V DC