NETGEAR LB2120 Series User Manual

Change the Billing Cycle Counter or Reset the Data
Counter
You can change the start date of the billing cycle counter to a day other than the first day of the month and
you can reset the data counter.The start date of the billing cycle counter is for display only and changing it
does not change the actual billing cycle of your mobile broadband provider.
To change the start date of the billing cycle counter or to reset the data counter:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
3. If you did not select the Remember me check box when you logged in previously, enter the modem
password in the Sign In field.
See the modem label for the default password.
4. Click the Sign In button.
The full Dashboard page displays.
5. In the Monthly Usage section, from the Billing start date menu, select a new start date.
The Submit button displays after you make a selection.
6. To reset the data counter for data usage, click the Reset button.
7. Click the Submit button.
Your settings are saved.
View Service Provider,Type of Service, and Signal
Strength
You can view the service provider, the type of network, and the signal strength of the mobile broadband
network at your location. If the modem is not connected to the network, you can view some of this information
for the most recent connection.
To view the service provider, type of network, signal strength, and other information:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The limited Dashboard page displays.
Manage the Modem and Monitor Usage and the Network
66
LTE Modem Model LB2120

NETGEAR LB2120 Series Specifications

General

Device Type	LTE Modem
LTE Category	Category 4
Download Speed	Up to 150 Mbps
Upload Speed	Up to 50 Mbps
Ethernet Ports	1 x Gigabit Ethernet
Network Technology	LTE, 3G
Antenna Ports	2 x TS-9
Operating Temperature	0° to 40°C
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	90% maximum relative humidity, non-condensing
SIM Card Slot	Yes (Mini-SIM/2FF)
Power Supply	12V DC