NETGEAR LB2120 Series User Manual

Table 10. LB2120 modem factory default settings (Continued)
Default SettingsFeature
EnabledVPN pass-through
Messaging
EnabledIncoming SMS messaging
Technical and Environmental Specifications
Table 11. LB2120 modem specifications
DescriptionFeature
TCP/IP, DNS relay, NAT (many-to-one), TFTP client, VPN pass-through, DNSData and routing protocols
Model LB2120-100AUS:
Input 200–240V, 50/60 Hz
Output: 12 VDC @ 1.0A
Power adapter
Model LB2120-100EUS:
Input 200–240V, 50/60 Hz
Output: 12 VDC @ 1.0A
Model LB2120-100NAS:
Input 100–120V, 50/60 Hz
Output: 12 VDC @ 1.0A
Model LB2120-100AUS:
120 by 99 by 31 mm (4.7 by 3.9 by 1.2 in.)
150 g (0.33 lb)
Dimensions (width by depth by
height) and weight
Model LB2120-100EUS:
120 by 99 by 31 mm (4.7 by 3.9 by 1.2 in.)
150 g (0.33 lb)
Model LB2120-100NAS:
120 by 99 by 31 mm (4.7 by 3.9 by 1.2 in.)
150 g (0.33 lb)
One 10/100/1000BASE-T, RJ-45 autosensing portGigabit Ethernet port
0° to 40°C (32° to 104°F)Operating temperature
Default Settings and Specifications
95
LTE Modem Model LB2120

NETGEAR LB2120 Series Specifications

General

Device Type	LTE Modem
LTE Category	Category 4
Download Speed	Up to 150 Mbps
Upload Speed	Up to 50 Mbps
Ethernet Ports	1 x Gigabit Ethernet
Network Technology	LTE, 3G
Antenna Ports	2 x TS-9
Operating Temperature	0° to 40°C
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	90% maximum relative humidity, non-condensing
SIM Card Slot	Yes (Mini-SIM/2FF)
Power Supply	12V DC