Connect to the Internet
When you turn on your Nighthawk M6, it automatically connects to the network in your
area. Connect your device to the Nighthawk M6 WiFi network to access the Internet.
Depending on the specific model and service provider, your Nighthawk M6 might come
with a preinstalled SIM card. If so, the SIM must be activated on a data plan from that
service provider. If your Nighthawk M6 does not come with a preinstalled SIM card, get
a SIM card with an active data plan from your service provider. Contact your service
provider for any SIM related issues.
To connect to the Internet:
1. Press the Power button to turn on the Nighthawk M6
The device powers up and the Lock screen appears.
2. On your laptop or WiFi device, open your WiFi network connection manager.
3. Select the Nighthawk M6 network with the WiFi name and password.
The Nighthawk M6 WiFi network name and password display on the LCD Home
page. If the LCD screen is blank (a power saving feature) press and quickly release
the Power button. The default WiFi password is also printed on a label under the
battery.
Connect from a smartphone using the QR
code
The top area of the dashboard contains a QR code. You can connect from a smartphone
by tapping the QR code.
User Manual13Get Started
Nighthawk M6
To Next Page
Loading...
Need help?
General
