Enable GPS from the Nighthawk M6
You can enable GPS location services on the Nighthawk M6. When GPS is enabled,
users can launch GPS-enabled apps on a computer and use the NMEA port to obtain
a GPS location.
To enable GPS on the Nighthawk M6:
1. From the Nighthawk M6 dashboard, select Settings > More > GPS.
The GPS screen displays.
2. Pull the slider to the right (On) to enable GPS.
GPS is enabled.
Manage your broadband network
connection
You can view the mobile broadband network status, turn domestic data on and off, and
turn international roaming on and off.
User Manual26Use Your Nighthawk M6
Nighthawk M6
To Next Page
Loading...
