NETGEAR MR6550 User Manual

2. Tap More.
3. Tap Factory Reset.
A message displays telling you that devices currently connected will lose Internet
access.
4. Tap Yes.
The Nighthawk M6 resets to its factory settings.
Reset the Nighthawk M6 from the Nighthawk M6 web page
To reset the Nighthawk M6 to its factory settings:
1. From a computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser.
2.
Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password is printed on the product label. The password is case sensitive.
The home page displays.
4. Select Settings > Administration > Factory Reset.
The Factory Reset page displays.
5. Click the Reset button.
A message displays telling you that devices currently connected will lose Internet
access.
6. Click the Yes button.
The Nighthawk M6 returns to its factory settings.
User Manual61Troubleshooting
Nighthawk M6

NETGEAR MR6550 Specifications

General

Brand	NETGEAR
Model	MR6550
Category	Network Router
Language	English