To turn international roaming on and off:
1. From a computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser.
2.
Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password is printed on the product label. The password is case sensitive.
The home page displays.
4. Select Settings > Advanced > Cellular.
The preferences page displays.
5.
In the check box for Roaming Data, check the box to turn roaming On or uncheck
it to turn roaming Off.
The Apply and Discard buttons display at the bottom of the page. >
6. Select Apply.
Your settings are saved.
Connect to WiFi
You can connect up to 32 devices (such as smartphones, laptops, tablets, digital cameras,
printers, gaming consoles, and digital picture frames) to your Nighthawk M6 network.
For information about setting connections for WiFi networks, see View mobile broadband
network status from the Nighthawk M6 on page 27.
To connect using the WiFi password:
1.
On the WiFi device, view the list of available WiFi networks.
2. Connect to the network that corresponds to your Nighthawk M6 network as displayed
on the LCD screen.
3.
When prompted, enter the WiFi password for your Nighthawk M6 network.
The WiFi password displays on the Nighthawk M6 LCD screen. If the screen is turned
off, press and quickly release the Power button to wake the Nighthawk M6.
Manage WiFi
You can set up the WiFi radio of the Nighthawk M6 to meet your WiFi needs by
customizing settings on the Nighthawk M6 web page.
User Manual29Use Your Nighthawk M6
Nighthawk M6
To Next Page
Loading...
