4. Click Apply.
Your settings are saved.
Turn on dual-band WiFi from the Nighthawk
M6 web page
Some versions of the Nighthawk M6 can broadcast WiFi signals in the 2.4 GHz and 5
GHz WiFi bands. Note that the overall throughput speed could decrease when WiFi
dual-band is enabled.
To turn on dual-band WiFi from the Nighthawk M6 web page:
1. From a computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser.
2.
Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password is printed on the product label. The password is case sensitive.
The home page displays.
4. Select WiFi Band.
The WiFi Band page displays.
5.
If your Nighthawk device model supports dual-band, select Dual-Band (2.4 & 5
GHz) or Dual-Band (2.4 & 6 GHz).
Note: The MR6150 does not support the dual-band feature.
The Apply and Discard buttons display at the bottom of the page.
6. Click Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
User Manual25Use Your Nighthawk M6
Nighthawk M6
To Next Page
Loading...
Need help?
General
