Temperature-related alerts
The Nighthawk M6 is designed to work over a wide temperature range (for more
information, see Environmental specifications on page 75.). The Nighthawk M6 shuts
down automatically if it goes out of the supported temperature range.
Move the device to an area where the temperature is more suitable and, if the Nighthawk
M6 is too warm, make sure that the area is well ventilated and air can circulate around
the device.
Note: The battery might not recharge if the Nighthawk M6 is outside the operating
temperature range.
Reset the Nighthawk M6
You can reset the Nighthawk M6 to the factory settings. This is useful if you reset the
admin login password for the Nighthawk M6 web page and forgot the new password.
Note: When you reset the Nighthawk M6, any currently connected devices lose access
and must be reconnected after the Nighthawk M6 restarts.
Reset the Nighthawk M6 from the Nighthawk M6
Start with the Nighthawk M6 turned on.
To reset the Nighthawk M6 directly from the Nighthawk M6:
1. Tap Settings.
User Manual60Troubleshooting
Nighthawk M6
To Next Page
Loading...
Need help?
General
