3. Connect the Nighthawk M6 to your computer using the USB cable.
The Nighthawk M6 automatically powers on.
After the driver is installed, you can visit the Nighthawk M6 web page to customize
your Nighthawk M6’s advanced settings. This is an optional step.
Log in to the Nighthawk M6 web page to
view or change settings
Your Nighthawk M6 comes configured and ready to use as is. You can use the Nighthawk
M6 web page to manage advanced settings.
To log in to your Nighthawk M6 web page:
1. From the computer or WiFi device that is connected to the Nighthawk M6, launch
a web browser.
2.
Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Log in using your admin password.
The default admin login password is printed on the product label. The password is
case sensitive.
User Manual18Get Started
Nighthawk M6
To Next Page
Loading...
