NETGEAR N300

Virtual Private Networking
112
N300 Wireless ADSL2+ Modem Router DGN2200v3
3. Configure the security policy in the NETGEAR ProSafe VPN Client software:
a. In the
Network Security Policy list, expand the new connection by double-clicking its
name or clicking the + symbol. My Identity and Security Policy subheadings appear
below the connection name.
b. Click the
Security Policy subheading to view the Security Policy settings.
Security Policy settings,
Client-to-Gateway A
c. In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode
radio button.
4. Configu
re the VPN client identity.
In this step, you provide information about the remote VPN client PC. You need to provide
the pre-shared
key that you configured in the modem router and either a fixed IP address
or a fixed virtual IP address of the VPN client PC.
a. In the Network Security
Policy list on the left side of the Security Policy Editor window,
click My Identity.
b. In the Select Certificate drop-down list, select None.