NETGEAR N300

Hardware Setup
17
N300 Wireless ADSL2+ Modem Router DGN2200v3
Verify the Cabling
Verify that your modem router is cabled correctly by checking the modem router LEDs. Turn
on the modem router by pressing the On/Off button on the back.
•
The Power LED is green when the modem router is turned on.
•
The LAN ports are green for each computer cabled to the modem router by an
Ethernet cable.
•
The WiFi LED is green when the modem router is turned on.
•
The DSL LED is green when you have a DSL connection.
•
The Internet LED is red when there is no Internet connection.
Turn on your computer. If software usually logs you in to your Internet connection, do not run
t
hat software. Cancel it if it starts automatically.
Verify that the LAN
LEDs (1 through 4) are lit for any computers cabled to the modem
router by an Ethernet cable.