EasyManuals Logo

NETGEAR N300 User Manual

NETGEAR N300
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Advanced Settings
90
N300 Wireless ADSL2+ Modem Router DGN2200v3
Advanced Wireless Settings
To go to the Advanced Wireless Settings screen:
Select Advanced > Advanced Setup > Wireless Settings to display the following
screen:
The following settings are available in this screen:
Enable Wireless Router Radio. Y
ou can completely turn off the wireless portion of the
wireless modem router by clearing this check box. Select this check box again to enable the
wireless portion of the modem router. When the wireless radio is disabled, other members of
your household can use the modem router by connecting their computers to the modem
router with an Ethernet cable.
Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
Turn off wireless signal by schedule. You can use this feature to turn off the wireless signal
from your modem router at times when you do not need a wireless connection. For instance,
you could turn it off for the weekend if you leave town.
WPS Settings.
You can add WPS devices to your network.
Wireless Card Access List. Y
ou can restrict access to your network to specific devices
based on their MAC address. See Restrict Wireless Access by MAC Address on p
age 91.

Table of Contents

Other manuals for NETGEAR N300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR N300 and is the answer not in the manual?

NETGEAR N300 Specifications

General IconGeneral
WiFi Technology802.11n
WiFi Speed300 Mbps
Frequency Band2.4 GHz
SecurityWPA/WPA2
Antenna2 external antennas
Ethernet Ports4 x 10/100 Mbps

Related product manuals