NETGEAR N300

Virtual Private Networking
124
N300 Wireless ADSL2+ Modem Router DGN2200v3
• HLifeTime (Secs). The remaining hard lifetime for this SA in seconds. When the hard
lifetime becomes 0 (zero), the SA (security association) is terminated. (It is
re-established if required.)
Deactivate a VPN Tunnel
Sometimes a VPN tunnel has to be deactivated for testing purposes. You can deactivate a
VPN tunnel from two places:
• Policy t
able on VPN Policies screen
• VPN S
tatus screen
 To use the Policy Table to deactivate a VPN tunnel:
1. Select Advance
d > Advanced - VPN > VPN Policies to display the VPN Policies
screen.
2. In the Policy Table, clear the Enable check box for the VPN tunnel that you want to
deactivate, and then click Apply. (To reactivate the tunnel, select the Enable check box, and
then click Apply.)
 To use the VPN Status Screen to deactivate a VPN tunnel:
1. Advance
d > Advanced - VPN > VPN Status, and click the VPN Status button. The
Current VPN Tunnels (SAs) screen displays:
2. Click Drop for the VPN tunnel that you want to deactivate.