NETGEAR N300

Administration
85
N300 Wireless ADSL2+ Modem Router DGN2200v3
To stop the polling entirely, click Stop.
Connection Status Button
 To view the Internet connection status:
On the Router Status screen in the
Internet Connection pane, click the Connection
Status button to view connection status information.
The Release button returns the status of all items to 0. The Renew button refreshes the
items. The Close Window button closes the Connection Status screen.
IP Address. The
IP address that is assigned to the modem router.
Subnet Mask. Th
e subnet mask that is assigned to the modem router.
Default Gateway.
The IP address for the default gateway that the modem router
communicates with.
DHCP Server. The
IP address for the Dynamic Host Configuration Protocol server that
provides the TCP/IP configuration for all the computers that are connected to the modem
router.
DNS Server.
The IP address of the Domain Name Service server that provides translation of
network names to IP addresses.
Lease Obtained. The
date and time when the lease was obtained.
Lease Expires. The
date and time that the lease expires.
Wireless Settings (2.4 GHz)
The following settings are displayed:
Name (SSID). The wireless ne
twork name (SSID) that the modem router uses.
Region. The
geographic region where the modem router is being used. It might be illegal to
use the wireless features of the modem router in some parts of the world.
Channel. The ope
rating channel of the wireless port being used. The default channel is Auto.
When Auto is selected, the modem router finds the best operating channel available. If you
notice interference from nearby devices, you can select a different channel. Channels 1, 6,
and 11 do not interfere with each other.