NETGEAR N300

ReadySHARE Printer
66
N300 Wireless ADSL2+ Modem Router DGN2200v3
USB Control Center Utility
The USB Control Center Utility allows you to control a shared USB device from your
computer that is connected to the USB port on your router. The utility allows you to control a
printer, a scanner.
You have to install the utility on each computer on your network from which you want to
c
ontrol the device. You can download this utility for PC and Mac at
www.netgear.com/landing/en-us/readyshare.aspx.
When you launch the USB Control Center Utility, a scree
n similar to the following displays:
The main screen shows a device icon, the description for this USB device, and its status.
Available. The d
evice is available from the computer that you are using.
Waiting to Connect. Y
ou need to connect to this device from the computer that you are
using. If this is the first time you are connecting, you might be prompted to install the device
driver.
Menu selections:
• Syste
m. Exit the utility.
• T
ools. Access the Control Center Configuration to set up your shared USB device. See
the following section, Control Center Configuration.
• About.
View details about the USB Control Center software.