Hardware Setup
9
N300 Wireless ADSL2+ Modem Router DGN2200v3
Unpack Your Modem Router
Your box should contain the following items:
• N300 Wirele
ss ADSL2+ Modem Router DGN2200v3
• AC
power adapter (plug varies by region)
• Categor
y 5 (Cat 5) Ethernet cable
• T
elephone cable with RJ-11 connector
• Microfilters and
splitters (quantity and type vary by region)
• CD
with documentation (German only)
• Inst
allation guide with cabling and modem router setup instructions
If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton
and original packing materials, in case you need to return the product for repair.
Hardware Features
Before you cable your modem router, take a moment to become familiar with the label and
the front and back panels. Pay particular attention to the LEDs on the front panel.
Label
The label on the bottom of the modem router shows the Restore Factory Settings button, ,
preset login information, MAC address, and serial number.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
Wi-Fi network name
MAC address
Serial
Restore
and password
Factory
Settings
number
Figure 1. Label on modem router bottom
See Factory Settings on page 143 for information about restoring factory settings.
To Next Page
Loading...
Need help?
General
