USB Storage
57
N300 Wireless ADSL2+ Modem Router DGN2200v3
3. can use this screen to select a folder, change the share name, or change the read access
or write access from All – no password to .
The user name (account name) for All – no passwo
rd is guest. The password for admin is
the same one that is used to log in to the modem router. By default, it is password.
4. Click App
ly for your changes to take effect.
USB Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device. On
the Advanced tab, select USB Storage > Advanced Settings to display the following
screen:
You can use this screen to specify access to the USB storage device.
• Netwo
rk Device Name. The default is readyshare. This is the name used to access the
USB device connected to the modem router.
• Wo
rkgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Access
Method. The access methods are described here.
Network Connection.
Enabled by default, this connection allows all users on the LAN to
have access to the USB drive.
HTTP. Enab
led by default. You can type http://readyshare.routerlogin.net/shares to
access the USB drive.
HTTP (via Internet. Disable
d by default. If you enable this setting, remote users can type
http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a URL
To Next Page
Loading...
