NETGEAR N300

Hardware Setup
15
N300 Wireless ADSL2+ Modem Router DGN2200v3
 To cable the modem router:
1. Connect the ADSL.
a.
ADSL
Phone
Line
Install an ADSL microfilter between the phone line and the phone.
b. Con
nect the ADSL port of the modem router to the ADSL port of the microfilter
c. Use an ADSL microf
ilter for every phone line in the house if your modem router and
telephone connect to the same phone line.
2. Add power to the
modem router.
Internet
ADSL
Phone
Line
2
a. Connect the power adapter to the router and plug the power adapter into an outlet.
b. W
ait for the WiFi LED on the front panel to turn on. If none of the LEDs on the front
panel are on, press the On/Off button on the rear panel of the modem router.
3. Conn
ect the computer.