NETGEAR N300

NETGEAR genie Advanced Home
50
N300 Wireless ADSL2+ Modem Router DGN2200v3
6. You can select an existing item from the list, or you can scroll and select Add a New
Application or Add a New Game, as applicable.
7. If
prompted, in the Connection Type list, select either TCP, UDP, or both (TCP/UDP). Specify
the port number or range of port numbers that the application or game uses.
8. From
the Priority list, select the priority for Internet access for this traffic relative to other
applications and traffic. The options are Low, Normal, High, and Highest.
9. Click Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
QoS for a Modem Router LAN Port
 To create a QoS policy for a device connected to one of the modem router’s LAN ports:
1. Select Advance
d > Setup > QoS Setup to display the QoS Setup screen.
2. Select the T
urn Internet Access QoS On check box.
3. Click the Setup QoS
Rule button.
4. Click the Add Prio
rity Rule button.
5. From
the Priority Category list, select Ethernet LAN Port, as shown in the following figure:
6. From the LAN port list, select the LAN port.
7. From
the Priority list, select the priority for Internet access for this port’s traffic relative to
other applications. The options are Low, Normal, High, and Highest.
8. Click Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
9. In
the QoS Setup screen, click Apply.
QoS for a MAC Address
 To create a QoS policy for traffic from a specific MAC address:
1. Select Advance
d > Setup > QoS Setup, and click the Setup QoS Rule button. The
QoS Setup screen displays.
2. Click Add Priority
Rule.