NETGEAR ProSafe GS108 Installation Guide

Unpack the Box and Verify
the Contents
When you open the box, verify that you received everything. The package includes:
• 8-Port Gigabit Ethernet Switch GS108
•AC power adapter
•Wall-mounting screws
• GS108 Installation Guide (this document)
•Warranty and registration card
•Support information card
If you don’t have everything listed above, see the support information card for contact
information. If you’re missing the support information card itself, get contact information at
www.NETGEAR.com in the Customer Service area
Installation guide,
warranty/registration card
and support
information card
Wall-mount
hardware
Model GS108 8-Port 10/100/1000 Mbps
Gigabit Ethernet Switch
Power adapter
1
1

NETGEAR ProSafe GS108 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Full duplex	Yes
Networking standards	IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Latency	20 μs
Dimensions (WxDxH)	235.5 x 100.8 x 27 mm
Power requirements	5 V @ 2.8 A DC
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Switch type	Unmanaged
Basic switching RJ-45 Ethernet ports quantity	8
Noise level	0 dB
Mean time between failures (MTBF)	91.500 h
Power consumption (typical)	14 W
Safety	UL (UL 1950), CUL, C-Tick
LED indicators	Link, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	760 g