NetGear Print Server Manual
45
8. Click on Next.
Figure 4-15 Configuration Completed shows the completion of the print server configuration.
Figure 4-15 Configuration completed
9. Click on Finish.
The PS100 Series Print Server is ready to be used.
If you have installed NETGAER Add Printer Wizard, you’ll be able to install the printer driver and
configure it. Click No, if you don’t need to add a printer to your system now. You can add a printer at a later
time by opening the NETGEAR Print Server group and running NETGEAR Add Printer Wizard.
Figure 4-16 Add a Printer
To Next Page
Loading...
