NETGEAR PS101 User Manual

NetGear Print Server Manual
59
6. Compare the IP address to MAC address association to assure that an IP address has been assigned,
using the ping command:
ping NAME
NAME is the name of the print server. You should receive a response. If you get a timeout message, the
BootP procedure has failed. You can either follow the steps again for using BootP or use one of the other
methods for assigning an IP address.
7. Proceed to “Configuring Your Print Server Using FTP” to configure the print server, if it has not yet
been configured.

NETGEAR PS101 Specifications

General

Brand	NETGEAR
Model	PS101
Category	Print Server
Language	English