NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Managing the Print Server 3-3
v2.0, April 2007
Releasing the Print Server
A printer that is reserved will automatically be released if it remains idle for 5 minutes. You can
also release it by clicking the Release button in the Reserve MFP window shown in Figure 3-2.
The status icon changes back to the green check mark shown in Figure 3-1.
Upgrading the Print Server Software
The Smart Wizard lets you check whether there is an update to the print server firmware or Smart
Wizard and, if so, lets you upgrade either or both.
To check for updates:
1. Click the SmartWizard icon, , in the system tray and click the Upgrade PS121v2 tab.
2. Select the items you want to detect and click Detect. If a new version is available, it will be
displayed in the New Version column.
3. If there is an upgrade shown in the New Version column, click Upgrade.
Note: If you have more than one PS121v2 print server on your network, your computer’s
operating system can only connect to the print server selected in the Smart Wizard.
If you want to connect to another print server, release the print server you reserved
and select the device you want from the displayed list.
Figure 3-3
To Next Page
Loading...
Need help?
General
