NETGEAR PS121 - USB Mini Print Server User Manual

NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Installation and Setup 2-3
v2.0, April 2007
Installation
First, install and set up the print server and a single PC. Then set up additional PCs to work with
the print server.
Install the Print Server and Set up One PC
1. Power on your computer, let the operating system boot up completely, and log in as needed.
2. Insert the Resource CD for the PS121v2 into your CD drive. The CD main page opens.
3. Click Install and Set Up the Print Server with This PC to start the installation wizard.
Note: For TCP/IP LPR printer installation, see “Installation for TCP/IP LPR Printing” on
page 2-6
Figure 2-2

NETGEAR PS121 - USB Mini Print Server Specifications

General

Brand	NETGEAR
Model	PS121 - USB Mini Print Server
Category	Print Server
Language	English