NETGEAR USB Multifunction Printer Server PS121v2 User Manual
2-8 Installation and Setup
v2.0, April 2007
Adding a Printer with Windows Vista
1. From the Windows Start menu of a computer connected to the same network as the USB
Multifunction Print Server, click Settings then click Printers.
2. Click Add a Printer, select Add a local printer, and then click Next.
3. Select the Create a new port radio button. From the Type of port drop-down list, select
Standard TCP/IP Port, and then click Next.
Figure 2-7
Figure 2-8
To Next Page
Loading...
