NETGEAR PS121 - USB Mini Print Server User Manual

NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Installation and Setup 2-9
v2.0, April 2007
The following screen opens:
4. Enter the IP address of the USB Multifunction Print Server in the Hostname or IP address box.
The Wizard will fill in the Port name box automatically. Click Next.
When the wizard contacts the printer, click Next. The wizard detects the port to use for the
USB Multifunction Print Server, and then displays this screen:
Figure 2-9
Note: For information about viewing the IP address, see “Installation” on
page 2-3. Also see “Reserve the Print Server’s IP Address on Your Router”
on page 2-5.
Figure 2-10

NETGEAR PS121 - USB Mini Print Server Specifications

General

Brand	NETGEAR
Model	PS121 - USB Mini Print Server
Category	Print Server
Language	English