Default Configuration Settings and Technical Specifications A-1
v2.0, April 2007
Appendix A
Default Configuration Settings and Technical
Specifications
Default Configuration Settings
The following table lists the default settings of your USB Multifunction Print Server.
Technical Specifications
The following table provides technical specifications for the USB Multifunction Print Server.
Feature Description
Smart Wizard Enabled
Network Settings
DHCP Enabled (The print server must be set to a static IP in
order to perform properly.)
User Name admin
Password password
Technical Specifications
Standards Compatibility IEEE 802.3u, 100BASE-TX, Fast Ethernet
IEEE 802.3i 10BASE-T CSMA/CD
NetBEUI, and TCP/IP protocols
Data Rate 10/100 Mbps
Interface 10BASE-T/100BASE-TX network port (RJ-45)
USB 2.0 port
Power Specifications for the Power
Adapter
Input voltage: 100 to 240 V AC, 50 to 60 Hz, according to the power
adapter
Localized plug: For North America, Japan, UK, Europe, and Australia
Output voltage: 12 V DC at 1A
To Next Page
Loading...
Need help?
General
