NETGEAR USB Multifunction Printer Server PS121v2 User Manual
2-12 Installation and Setup
v2.0, April 2007
Adding a Printer with Windows XP or Windows 2000
1. Run the Windows Add Printer Wizard as follows:
a. From the Windows Start menu of a computer connected to the PS121v2, click Printers and
Faxes.
b. Click Add a printer and then Next to proceed.
c. Choose the Local printer attached to this computer option.
d. Click Next to proceed.
e. On the Select a Printer Port screen, be sure to choose the Create a new port: option. From
the “Type of port” drop-down list, select Standard TCP/IP Port.
Figure 2-14
Figure 2-15
Figure 2-16
To Next Page
Loading...
