NETGEAR PS121 - USB Mini Print Server User Manual

NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Installation and Setup 2-13
v2.0, April 2007
The Add Standard TCP/IP Printer Port Wizard opens. Click Next to open the Add Port
screen shown below:
f. Click Next to proceed. Fill in the IP address you will use for the printer in the Add Port
screen.
g. Click Finish to proceed. The Add Standard TCP/IP Printer Port Wizard opens.
Figure 2-17
Note: For information about viewing the IP address, see “Installation” on
page 2-3. Also see “Reserve the Print Server’s IP Address on Your Router”
on page 2-5.
Figure 2-18

NETGEAR PS121 - USB Mini Print Server Specifications

General

Brand	NETGEAR
Model	PS121 - USB Mini Print Server
Category	Print Server
Language	English