NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Managing the Print Server 3-7
v2.0, April 2007
The browser displays the PS121v2 name and firmware version, and its IP settings.
4. To edit the IP settings, click LAN IP Setup in the main menu.
Figure 3-8
Figure 3-9
Warning: Leave the DHCP Client setting as Disable so that the print server has a
fixed IP address. It is not recommended that you select Enable. If you do,
the print server will find an IP address automatically from the router or
other DHCP server in your network. When the DHCP server changes the
IP address, you will be disconnected from the print server’s web browser
interface and unable to open it again unless you can identify the
reassigned IP address. Also, the SmartWizard assumes that the IP address
of the print server is fixed.
To Next Page
Loading...
Need help?
General
