NETGEAR RP114 - Page 151

Index 1
A
Action Matched/Not Matched field
Generic Filter Rule menu 10-10
TCP/IP Filter Rule menu 10-8
Active field
Edit IP Static Route menu 5-9, 8-14
Generic Filter Rule menu 10-9
Remote Node Profile menu 8-4
Syslog and Accounting menu 9-5
TCP/IP Filter Rule menu 10-7
Address Resolution Protocol B-9
Alcatel ANT 4-5, 8-5
auto MDI/MDI-X switching B-11
B
backup configuration 6-5
blocking
by keyword 4-9
C
cables, pinout B-10
Cabling B-10
Cat5 cable 2-2, 2-4, B-11
command interpreter mode 9-9
configuration
automatic by DHCP 1-4
backup 6-5, 9-8
erasing 6-5
restore 6-5
router, initial 4-1
Connection ID/Name 4-6, 8-5
content filtering 1-3
conventions
typography xvii
crossover cable 1-4, 2-5, 11-2, B-11
customer support iii
D
default reset button 11-8
default router address 7-1
Destination field, TCP/IP Filter Rule menu 10-7
Destination IP Address field, Edit IP Static Route
menu 5-9, 8-14
DHCP 1-4, 5-3, B-10
DHCP Client ID 3-6
DHCP Setup field, Ethernet Setup menu 5-4, 6-2, 7-10
DMZ 1-3, 5-7, 8-10
DNS Proxy 1-4, 5-4, 7-10
DNS server 3-9, 4-7, B-9
DNS, dynamic 5-2
domain 3-9
Domain Name 4-4
domain name server (DNS).
See
DNS server
Dynamic DNS 5-2, 8-17
dynamic NAT.
See
Network Address Translation
E
Edit IP Static Route menu 8-14
Encapsulation 4-5, 8-2, 8-5
End Port 5-7
EPROM, for firmware upgrade 1-2, 1-5
erase configuration 6-5
error log 9-4
Ethernet cable B-10
Ethernet field, System Maintenance menu 9-3
Index