Reference Guide for the Model RP114 Web Safe Router
Using the Manager Interface for Initial Router Configuration 7-3
Using the Manager Interface
Login
When power is first applied to the router, several internal tests are performed by the router. The
router will not accept a Telnet connection until initialization is complete as indicated by the TEST
LED turning off. Log in to the Manager interface:
1.
Open a Telnet session as described in the previous section, and log in.
The Main Menu (Figure 7-1) of the Manager will appear.
Figure 7-1. Manager Main Menu
RP114 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
2. WAN Setup
3. LAN Setup 23. System Password
4. Internet Access Setup 24. System Maintenance
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup
99. Exit
To Next Page
Loading...
