NETGEAR RP114 User Manual

Basic Configuration of the Router 4-1
Chapter 4
Basic Configuration of the Router
This chapter describes how to perform the basic configuration of your Model RP114 Web Safe
Router using the Setup Wizard, which walks you through the configuration process for your
Internet connection. This chapter also describes the configuration for content filtering.
Configuring for Internet Access
In order to use the browser-based Web Configuration Manager, your PC must have a web browser
program installed such as Microsoft Internet Explorer or Netscape Navigator. Because the
Configuration Manager uses Java, your Web browser must be Java-enabled and support HTTP
uploads. NETGEAR recommends using Netscape Navigator 3.0 or above. Free browser programs
are readily available for Windows, Macintosh, or UNIX/Linux.
To configure for Internet access using your browser:
1.
Turn on the router and wait for initialization to complete.
Allow at least one minute and verify that the TEST LED is off.
2.
Reboot your PC to obtain DHCP configuration from the router.
3.
Launch your web browser.
4.
In the Address box of your browser, type
http://192.168.0.1
and press ENTER.

NETGEAR RP114 Specifications

General

Dimensions (WxDxH)	159 x 102 x 32 mm
Connectivity technology	Wired
Supports ISDN connection	Yes
Product color	Blue
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	2750 g