Reference Guide for the Model RP114 Web Safe Router
7-12 Using the Manager Interface for Initial Router Configuration
2.
Enter your previous system password, and press [Enter].
3.
Enter your new system password, and press [Enter].
4.
Enter your new system password again for confirmation, and press [Enter].
You must enter this new password when you want to access the Manager by a Telnet connection.
If you lose or forget the Manager password, you must clear the configuration of the router as
described in Chapter 11, “Troubleshooting.” Clearing the configuration causes the Manager
password to revert to the default, 1234.
To Next Page
Loading...
