NETGEAR SXR80

Table 4. Factory default settings for the router (Continued)
Default SettingFeature
192.168.1.2LAN 1 DHCP starting IP address
192.168.1.254LAN 1 DHCP ending IP address
Local network 2 (LAN 2)
192.168.20.1LAN 2 IP
255.255.255.0LAN 2 subnet mask
EnabledLAN 2 DHCP server
192.168.20.2 to 192.168.20.254LAN 2 DHCP range
192.168.20.2LAN 2 DHCP starting IP address
192.168.20.254LAN 2 DHCP ending IP address
Local network 3 (LAN 3)
192.168.30.1LAN 3 IP
255.255.255.0LAN 3 subnet mask
EnabledLAN 3 DHCP server
192.168.30.2 to 192.168.30.254LAN 3 DHCP range
192.168.30.2LAN 3 DHCP starting IP address
192.168.30.254LAN 3 DHCP ending IP address
Local network 4 (LAN 4)
192.168.40.1LAN 4 IP
255.255.255.0LAN 4 subnet mask
EnabledLAN 4 DHCP server
192.168.40.2 to 192.168.40.254LAN 4 DHCP range
192.168.40.2LAN 4 DHCP starting IP address
192.168.40.254LAN 4 DHCP ending IP address
Local network 5 (LAN 5)
192.168.50.1LAN 5 IP
255.255.255.0LAN 5 subnet mask
EnabledLAN 5 DHCP server
User Manual170Supplemental Information
Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80