NETGEAR SXR80 User Manual

Table 4. Factory default settings for the router (Continued)
Default SettingFeature
192.168.50.2 to 192.168.50.254LAN 5 DHCP range
192.168.50.2LAN 5 DHCP starting IP address
192.168.50.254LAN 5 DHCP ending IP address
Firewall
Disabled (except traffic on port 80, the HTTP port)Inbound (communications coming in from the Internet)
Enabled (all)Outbound (communications going out to the Internet)
DisabledSource MAC filtering
WiFi
EnabledWiFi communication
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
1
Transmission speed
United States in the US
Otherwise, varies by region
Country/region
AutoRF channel 2.4 GHz fronthaul
AutoRF channel 2.4 GHz backhaul
Channel 48 for NA, AU, and CA
Channel 36 for EU
RF channel 5 GHz fronthaul
Channel 48 for NA, AU, and CA
Channel 36 for EU
RF channel 5 GHz backhaul
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
User Manual171Supplemental Information
Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80

NETGEAR SXR80 Specifications

General

Brand	NETGEAR
Model	SXR80
Category	Network Router
Language	English