NETGEAR WAG511 User Manual

202-10041-01 September 2004
Glossary
1
Glossary
List of Glossary Terms
Use the list below to find definitions for technical terms used in this manual.
10BASE-T
IEEE 802.3 specification for 10 Mbps Ethernet over twisted pair wiring.
100BASE-Tx
IEEE 802.3 specification for 100 Mbps Ethernet over twisted pair wiring.
802.1x
802.1x defines port-based, network access control used to provide authenticated network access and
automated data encryption key management. The IEEE 802.1x draft standard offers an effective framework
for authenticating and controlling user traffic to a protected network, as well as dynamically varying
encryption keys. 802.1x uses a protocol called EAP (Extensible Authentication Protocol) and supports
multiple authentication methods, such as token cards, Kerberos, one-time passwords, certificates, and public
key authentication. For details on EAP specifically, refer to IETF's RFC 2284.
802.11a
IEEE specification for wireless networking at 54 Mbps operating in unlicensed radio bands over 5GHz.
802.11b
IEEE specification for wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS)
technology and operating in the unlicensed radio spectrum at 2.5GHz.
802.11g
A soon to be ratified IEEE specification for wireless networking at 54 Mbps using direct-sequence
spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.5GHz. 802.11g is
backwards compatible with 802.11b.
Ad-hoc Mode
An 802.11 networking framework in which devices or stations communicate directly with each other,
without the use of an access point (AP). Ad-hoc mode is also referred to as peer-to-peer mode or an
Independent Basic Service Set (IBSS). Ad-hoc mode is useful for establishing a network where wireless
infrastructure does not exist or where services are not required.

NETGEAR WAG511 Specifications

General

Brand	NETGEAR
Model	WAG511
Category	Computer Hardware
Language	English