User’s Manual for the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511
Wireless Security Configuration 5-15
202-10041-01 September 2004
Using Cisco-LEAP Advanced Security
You can have very strong security on your wireless connection by enabling Cisco-LEAP. For more
information on wireless security, see “Wireless Networking Overview” on page B-1.
Figure 5-8: Cisco LEAP in a wireless network
Basic Requirements for Cisco-LEAP
Cisco-LEAP requires these elements:
1. A Cisco-LEAP enabled adapter with Cisco-LEAP client software such as the WAG511.
2. A Cisco-LEAP enabled wireless access point.
3. A Cisco Secure Access Control Server (ACS).
Cisco-LEAP Security Settings Worksheet
Print this form, fill in the configuration parameters and put it in a safe place for possible future
reference. For an existing wireless network, the person who set up the network will be able to
provide this information.
• Wireless Network Name (SSID)
The Service Set Identification (SSID) identifies the wireless local area network.
Note
: Some wireless access points will not broadcast their SSID as a security feature. In such
a case, you will need to get the SSID from the wireless network administrator.
Wireless network name (SSID): ______________________________
• User Name: ______________________ Password: ______________________
To Next Page
Loading...
Need help?
General
