NETGEAR WG602 - 54 Mbps Wireless Access Point

M-10181-03
M-10181-03
March 2004
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone 1-888-NETGEAR
Reference Manual for the
WG602 v2 54 Mbps Wireless
Access Point

NETGEAR WG602 - 54 Mbps Wireless Access Point Specifications

General

Maximum Data Rate	54 Mbps
Frequency Band	2.4 GHz
Security	WEP, WPA, WPA2
Wireless Standard	IEEE 802.11g
Ports	1 x 10/100 Mbps Ethernet
Power Supply	12V DC
Compliant Standards	IEEE 802.11g, IEEE 802.11b

Summary

Chapter 2 Introduction

About the 54 Mbps Wireless Access Point WG602 v2

Introduces the WG602 v2 as a fundamental building block for wireless LAN infrastructure.

Key Features

Highlights the primary functionalities and capabilities of the WG602 v2 access point.

Hardware Description

Details the front and rear panel components and status LEDs of the WG602 v2.

Chapter 3 Basic Installation and Configuration

Observing Placement and Range Guidelines

Provides guidance on optimal placement for wireless coverage and performance.

Installing the 54 Mbps Wireless Access Point WG602 v2

Step-by-step instructions for setting up and testing basic wireless connectivity.

Understanding WG602 v2 Wireless Security Options

Explains available wireless security features like WEP, WPA, and MAC address filtering.

How to Configure WEP Wireless Security

Detailed steps for configuring Wired Equivalent Privacy (WEP) encryption.

Chapter 4 Management

Viewing General Information

Displays current system status, IP settings, and wireless configuration.

Upgrading the Wireless Access Point Software

Procedure for updating the access point's firmware to the latest version.

Rebooting and Resetting Factory Default Options

Instructions on how to restart or restore the device to its original factory settings.

Chapter 5 Advanced Configuration

Configuring Wireless Bridge or Repeater Links

Guides on setting up advanced wireless modes like bridging and repeating.

How to Configure a WG602 v2 as a Point-to-Point Bridge

Detailed steps for establishing a point-to-point wireless bridge connection.

How to Configure a WG602 v2 as a Repeater

Instructions for configuring the access point to extend wireless network range.

Chapter 6 Troubleshooting

I cannot configure the wireless access point from a browser.

Troubleshooting steps for issues accessing the device via its web interface.

I cannot access the Internet or the LAN with a wireless capable computer.

Diagnosing and resolving connectivity problems for wireless clients.

Using the Reset Button to Restore Factory Default Settings

How to use the physical reset button to restore default configurations.

Appendix D Preparing Your PCs for Network Access

Preparing Your Computers for TCPIP Networking

Steps required to prepare PCs for TCP/IP network configuration.

Enabling DHCP to Automatically Configure TCPIP Settings

Guide on enabling DHCP for automatic network configuration on PCs.