Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
C-24 Preparing Your Network
September 2004 202-10042-01
Restarting the Network
Once you’ve set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the
firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your WGX102 Wall-Plugged Range Extender, you are
ready to access and configure the firewall.
To Next Page
Loading...
Need help?
Weight and Dimensions
