NETGEAR WGX102 User Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
Content Filtering in Router Mode 7-5
September 2004 202-10042-01
Configuring Services Blocking by IP Address Range
Under “Filter Services For”, you can block the specified service for a single computer, a range of
computers (having consecutive IP addresses), or all computers on your network.
Scheduling When Blocking is Enforced
The WGX102 Wall-Plugged Range Extender allows you to specify when blocking is enforced.
The Schedule menu is shown below:
Figure 7-4: Schedule menu
• Use this schedule for blocking content. Select this check box if you want to enable a schedule
for Content Filtering. Click Apply.
• Days to Block. Select days to block by selecting the appropriate check boxes. Select Everyday
to select the check boxes for all days. Click Apply.
• Time of Day to Block. Select a start and end time in 23:59 format. Select All day for 24 hour
blocking. Click Apply.
Note: Be sure to select your Time Zone in the E-mail menu.

NETGEAR WGX102 Specifications

Weight and Dimensions

dimensions	3 x 8.6 x 6.5 in, 75 x 220 x166 mm
weight	2.0 lb