NETGEAR WNA1000M User Manual

Chapter 1: Getting Started | 15
N150 Wireless Micro USB Adapter WNA1000M
The Smart Wizard goes to the NETGEAR website and checks for newer software. If there
is a newer version of firmware, this screen displays:
3. Click OK. When the file has been downloaded, a message like the following displays:
4. Click Yes. Follow the installer instructions, and if prompted, restart your computer.
Removing the Software
You can remove the wireless adapter software through the Windows Program List or the
Windows Control Panel.
• Windows Program List: Select Windows Start > Micro USB Adapter program group.
Click Uninstall and follow the screen prompts.
• Control Panel: How you do this depends on your Windows operating system:
- Windows 7: Select Windows Start >Control Panel > Programs and Features >
Micro USB Adapter. Click Uninstall and follow the screen prompts.
- Windows Vista: Select Windows Start >Control Panel > Programs and Features >
Micro USB Adapter. Click Uninstall/Change from the top menu and follow the
screen prompts.
- Windows XP: Select Windows Start > Control Panel > Add or Remove Program,
and then select Micro USB Adapter.

NETGEAR WNA1000M Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Chipset	-
Internal	No
Component for	PC/Laptop
Product color	Black
Wi-Fi band	Single-band (2.4 GHz)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	150 Mbit/s
Minimum processor	Intel® Pentium®
Optical drive required	Yes
Compatible operating systems	Windows 7/XP/Vista (32/64-bit)
Compliance industry standards	IEEE 802.11 b/g/n
Dimensions (W x D x H) (imperial)	0.79 x 0.28 x 0.59 \

Weight and Dimensions

Depth	8 mm
Width	34 mm
Height	17 mm
Weight	4 g