NETGEAR WNA1000M User Manual

Chapter 2: Network Connections and Wireless Security | 17
N150 Wireless Micro USB Adapter WNA1000M
3. Select Wireless Network Connection, right-click, and then select Properties.
4. Click the Wireless Networks tab. Then clear the Use Windows to configure my wireless
settings check box.
Viewing Wireless Networks in Your Area
You can use the Networks tab to view all available wireless networks in your area. You can
also scan to search for wireless networks and refresh the tab.
To view wireless networks:
1. Use the
icon to open the Smart Wizard.
2. Click the Networks tab to display the following screen:
You can click a column
heading to sort.
If many networks use
the same channel they
can interfere with each
other. (G) indicates a
The status bar shows
your network connection
and Internet connection.
2.4 GHz network.
The screen shows the following information for each network scanned:
• Network Name (SSID). The name of the wireless network. As a security measure, some
wireless access points do not broadcast the network name. In such cases, the Network
Name (SSID) field is blank even though the rest of the information is displayed.

NETGEAR WNA1000M Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Chipset	-
Internal	No
Component for	PC/Laptop
Product color	Black
Wi-Fi band	Single-band (2.4 GHz)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	150 Mbit/s
Minimum processor	Intel® Pentium®
Optical drive required	Yes
Compatible operating systems	Windows 7/XP/Vista (32/64-bit)
Compliance industry standards	IEEE 802.11 b/g/n
Dimensions (W x D x H) (imperial)	0.79 x 0.28 x 0.59 \

Weight and Dimensions

Depth	8 mm
Width	34 mm
Height	17 mm
Weight	4 g