NETGEAR WNA1000M User Manual

Appendix A: Technical Specifications and Factory Default Settings | 37
N150 Wireless Micro USB Adapter WNA1000M
Factory Default Settings
The following table lists the default settings of your wireless-N USB adapter.
Default Settings
Smart Wizard Enabled
Wireless Wireless communication Enabled
Wireless Network Name (SSID) Any (will connect to the first wireless network that responds.
Security Disabled
Network type Infrastructure
Transmission speed Auto
1
1 Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate
Country/Region United States (varies by region)
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 150 Mbps

NETGEAR WNA1000M Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Chipset	-
Internal	No
Component for	PC/Laptop
Product color	Black
Wi-Fi band	Single-band (2.4 GHz)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	150 Mbit/s
Minimum processor	Intel® Pentium®
Optical drive required	Yes
Compatible operating systems	Windows 7/XP/Vista (32/64-bit)
Compliance industry standards	IEEE 802.11 b/g/n
Dimensions (W x D x H) (imperial)	0.79 x 0.28 x 0.59 \

Weight and Dimensions

Depth	8 mm
Width	34 mm
Height	17 mm
Weight	4 g