Netgenium AUG3201-IP User Manual

geniumNet
AUG3201-IP Cong Guide
© Copyright Netgenium Systems 2017 Page 13
Flex Outputs
Navigate to: Gateway>Flex-IO Inputs
The gateway supports upto 4 Flex Outputs. Each output can supply a switched
negative +12Vdc supply to a third party device, typically a relay. The output is
turned on as a result of a pre selected gateway condition. The output can also
be controlled by PolicyServer
All Flex Outputs are disabled by default.
To congure a Flex Output:-
1. Enable the desired Flex Output by selecting the gateway condition that
activates the output from the ‘Operation’ list box.
2. Set the duration the output is active (Momentary or Whilst Trigger Active)
3. Ensure the Flex Output is wired correctly.
4. Click Apply

Netgenium AUG3201-IP Specifications

General

Brand	Netgenium
Model	AUG3201-IP
Category	Switch
Language	English